GROUTING WIDE CRACKS
IN A TROUBLE-FREE APPLICATION

DO YOU THINK YOU SHOULD CARRY ON WITHOUT CHANGE?

Large PLOT 030.gif -

If you chose to continue with 0.8:1 grout for this second period it is time to thicken to 0.6:1. Otherwise far too much water is being injected.
However, if you were using 0.6:1 it would not be essential to thicken further for the next period, but it would be best to do so.

IF YOU HAVE BEEN USING 0.8:1 YOU SHOULD THICKEN.

BUT IF YOU HAVE BEEN USING 0.6:1 AND YOUR DECISION IS TO CARRY ON WITHOUT CHANGE
IT IS TOLERABLE BUT NOT THE BEST.

It is necessary to decide what to do next. The choice is from one of the following:

  1. Let the simulation decide what to do next.
  2. Carry on grouting without change.
  3. Thicken the mix